On February 14, 2017, I decided to grow taller with Yufeng, and gave myself a little lover at the age of 35, which can be regarded as another big toy for myself in the road of life. In fact, people don’t grow up, and they still hold on to their childhood toys. . . I have been in this forum for 12 years, and it has been 7 years since I said it. I have learned and obtained, and of course I have been poisoned.
In the next time, I will write down my modification experience, all car friends can learn from it, you can make bricks, of course, you are more welcome to communicate and go wandering together.
After paying the money, the dealer took the photos for me. I was very excited when I saw my little lover. I also have my own RV. I want to dress her up beautifully. I want to take her to swim in Dajiang and go shopping. The sea, go to see the mountains, go to play in the stream. . .
grow taller
During the few months when I brought her back, I didn’t touch her, let’s get used to the environment first, haha. I want to use the best design plan to dress her up as a beautiful and moving bride. .
There are only two driver’s seats, the front and the second, and nothing else.
Because the final modification plan was not determined at the beginning, she was used as a truck first, and the equipment was pulled to hold a tour.
Stop in the company yard for surveying and mapping.
Every detail and every corner is measured accurately, laying the foundation for designing drawings on the computer.
What the cockpit looks like
I sat in the car when I had nothing to do, watching and thinking, regardless of mosquito bites, thirst and hunger. . .
The specific modification plan has not yet been determined, but no matter what the plan is, the glass film, and shock absorption and heat preservation must be done. It just needs to be explained that it is best not to do heat preservation after accurate surveying and mapping, because it will affect the surveying and mapping data.
The anti-vibration sticker was given by my classmate’s factory. It is a leftover material for making anti-vibration stickers, which is just used.
In fact, it doesn’t matter if you don’t paste the depressions on the floor, because there are floors and furniture on it, so they won’t vibrate. Anyway, I have anti-vibration stickers, so stick them on, and the weight won’t increase much.
These shock absorbing stickers don’t have to fill all the space, just do it at intervals. Its role is only to eliminate resonance.
Get some styrofoam if you have time, the company has it, there is no way.
Isn’t it pretty? ?
The cat stuck it in the car for three or four days.
Beat foam.
In those days, these anti-vibration stickers were pulled on the car, and they were stuck in the car wherever there was nothing to do. . .
I usually drive alone, commuting to and from get off work, and it can be used as a commuter car, because we are in a district of Qingdao, not an urban area, so there will be less traffic jams, plus I think my driving skills are fine, so I still have the confidence to drive She runs all over the street. It also has office functions, you can work on the computer, surf the Internet, watch TV when you are tired, and of course do publicity for your company. It is only on occasional weekends or holidays that you can take your wife and children out. It should be able to meet the daily needs of 3 children and 2 adults without being too crowded. This seems to have exceeded the space capabilities of this car. I thought about making the top of the cab or the side hanging cabinet a foldable bed, and I thought about making the roof of the car a bed. I thought about it a lot and for a long time. But after my own simulation, I found that not only the difficulty of production has increased, but also it is very inconvenient to use. It changes and changes. It may still feel fresh at first, and it will become annoying after a few times of use. Give yourself a concept: If you use it occasionally a few times a year, then make an emergency plan instead of a regular plan. If the investment is too large, don’t do it at all.
Let’s talk about the specific plan in the next post. . . Send pictures to your friends first. This is the final draft plan that has been revised many times by myself.
This is after refitting, went to Weihai to do business, and stayed overnight in a park.
There is a bicycle rack on the back of the car, so I can take my beloved bicycle with me.
In the early morning after the rain, the air was very fresh, and I also went out for a stroll, and the RV attracted people’s special attention.
Some riders are visiting.
It takes a lot of brain cells to meet the needs of one person commuting to and from get off work, office work, and a family going out to play, eat and sleep, but fortunately, the brain cells did not die in vain. There are two decks and two lift tables on the left side of the car. Usually, the deck at the back is laid flat, and the adjustable table is lowered to form a bed with a length of 1900 and a width of 1000. It is really comfortable for one person to sleep, and two adults can make do with it. If there is one adult and one child, there is no problem at all. The front desk and deck form an office area. There is a computer on the desk, a drawer under the desk, and a printer that can be pulled out. Of course, there are bookshelves and small storage compartments in the left mezzanine. If you are tired from a work-related injury, you may pull off the quilt to rest for a while at noon, so you don’t have to change the bed back and forth, which is labor-saving and convenient.
This is the deck and the adjustable table. After they are ready, put them in the car for a try.
The front lift table was originally designed to be foldable. After using it for a period of time, the hinges could not bear the pressure of the arms and became uneven. The purpose of folding is to increase the space for the pair of seats to a greater extent when the card seats are paired backwards. Later, after using it, I learned that I didn’t sit in the same seat several times a year. It was completely tasteless, so I decisively rebuilt the table.
This is the card seat at the back, which is folded on both sides, so that it can have a large table when facing each other, which is convenient for eating. When lowered, it can form a plane with the deck and become a bed.
Let’s talk about the pictures you find. I don’t have to play the cards in order. . .
This is the controller of the electric toilet, which adds the function of starting the inverter with one button. Originally, to use the toilet, the inverter must be turned on first. Too troublesome. In case one day I forget and sit on the toilet, do I still have to drive the inverter with bare PP? If it is inconvenient, just change it. The circuit has been changed and an aerospace socket has been added for connecting to the inverter.
4-core aerospace socket, connected to inverter.
Electric toilet, move it up and see if it fits? At the beginning, it was installed obliquely like this. After using it for a period of time, it found that it took up space, so it was straightened.
This is a range hood, and the function of starting the inverter with one button is also added. As long as the range hood is pulled out, it will start automatically.
I paved the second step on the middle door with the floor, which can increase the area. The consequence is that it is too high to get on the car, which is inconvenient, and electric pedals are added.
This is the step of the middle door of the car. The floor decoration strip made in my workshop has the company’s name engraved on it. Acrylic panels are used inside, and ambient lights are installed, which will light up as long as the door is opened.
The pedal manufacturer talked about an agent by the way.
Pedal Accessories
pedal chassis
Holes for mounting pedals.
Paint after drilling.
Install the pedal hanger.
After the installation is complete, the wiring signal is connected to the touch switch of the middle door, and the power supply is 12V, which is very simple. It’s just too tiring to install and the pedals are too heavy.
What it looks like after installation.
Electric water heaters, like electric toilets, do not have the function of one-button activation of the inverter, dismantle, modify, add! !
After installation, when the inverter is turned off, if you want to use hot water and adjust the temperature, the inverter will be turned on automatically, and the power supply will stop when the temperature rises, and the inverter will also be turned off.
Roof design:
The overall design concept is “square on the outside and round on the inside”, which is also the principle of our life and work. The outside is square, which means that we must be upright and not be influenced by people; There are 12 petals, which represent 12 months of the year; the four areas outside the petals represent the four seasons of the year; every year, every season, every month is safe and smooth. The widths of petals, lines and circles all have specific numbers, which represent different meanings and will not be described in detail.
Before installing the wall cabinet, first install the ceiling in place, and throw out all the internal light lines.
This is the effect of daily lighting, 8 lights are on at the same time, and only one group was connected during the test.
It is the effect of the inner white light strip.
This is the effect of the blue light strip.
This is the effect of the yellow light strip.
Adding these ambient lights didn’t work a few times, it was purely my own heart. I didn’t seduce a little girl either, so I pretended for nothing.
This is the design of the side panel, which is made of colored stainless steel panels and the middle pp honeycomb panel. We make cabinet materials. The pp honeycomb panel adds another layer of insulation.
Including the wall cabinets, the whole vehicle is made of stainless steel, for environmental protection and for the lack of glue smell. We want to live here, so we can’t be poisoned to death.
The storage compartments or bookshelves on the side panels are also fine, and it has been proved that it is very convenient for storage. Some useful little things, a mobile phone for sleeping at night, a power supply for a laptop at work, a few books and materials, toilet water, etc., you can’t think of.
Of course, while it is practical, I didn’t forget to install ambient lights. Of course, I still feel turbulent. . .
The material is titanium plate, which is cut by laser. Fortunately, I have these equipments at home, and they are convenient to use. After cutting, add acrylic board and light strip.
These square holes are the bottom box of the socket
I have seen a lot of RV designs without a separate shoe cabinet, because when going out to play, it is inevitable to prepare different types of shoes. There is no storage place, and it is inconvenient and unsightly to put shoes in a mess in the car. It is very convenient to think about where to get on the bus. Of course, there are more important functions, which will be explained slowly.
The stainless steel honeycomb panels of the shoe cabinet are first glued into shapes with nail-free glue. Then use corner codes to add pull rivets to fix.
This is a good effect. Of course, all dimensions are well designed, especially the height must be equal to the booth, because it is a part of the second bed.
The interior is divided into three layers, which can hold about 10 pairs of shoes, which is basically enough. The empty space on the right is for vacuum cleaners, shoe polish, shoe brushes and other items.
This is the effect of adding the countertop. At the same time, the adjustable table in front can be lowered to the same height as the shoe cabinet. It is also a part of the second bed.
There are two beds in my car, one is the vertical bed on the left rear, which is composed of the second floor of the rear high cabinet + hub cabinet + rear deck + rear lift table. The width is 1000, the length is 1900, and my height is 1700. There is also a space in the back for some oil, salt, sauce and vinegar in the back kitchen, so there is only 1800 left in the back bed. Because this bed is composed of multiple objects, the height is strictly controlled, and an automatic inflatable mattress is laid on it, which is as comfortable as the big bed at home. Then there is the horizontal bed in the front, which is composed of a front lifting table + a front booth + a shoe cabinet + a portable dining table. Usually this bed is not spread, and it is only used when a family travels.
This is a portable folding dining table. Of course, this size is not the one on my car. It was used when I changed the car for a car friend in 2017, but the form is the same.
It can be folded, and the thickness after folding is only 80mm.
This is what a car friend puts on his car, and it is also used to change the bed.
This is the rear door trim panel on my car, with a thickness of 6mm, made of stainless steel wood grain board, and the middle pp honeycomb board is overwhelmed. Just add side strips.
This is for the right rear door, and the handle hole is also laser cut out.
Write about whatever photos you find, in no order. Today, I found a photo of the electrical box from my mobile phone. The guest officer took a look at it slowly. Don’t blame me for taking it to the ditch. I run all the wiring in my RV through flame retardant tubing, no matter how cumbersome it is. Moreover, the wires used are all oxygen-free copper tinned wires. The old drivers know what’s going on, so I won’t elaborate. All the wires have been calculated, not the thicker the better, just enough. As long as the material of the wire is pure, it is definitely no problem to calculate the margin. The 220V line uses 2.5 national standard oxygen-free copper tinned wire, which can theoretically carry 5000W, but the maximum is only 3000W in the RV, which is enough. Of course, some control lines don’t matter, N*0.5 is enough, but the voltage drop should not be too large, and the current is very small.
More than 200 new lithium iron phosphate batteries were imported at one time, and the wooden boxes were sealed, and they were grouped at the factory. So many batteries were in one group, and the voltage and internal resistance were almost identical. The nominal is 200AH, but there are actually 230AH, and the actual performance is also very good, but I can’t buy it now, but I still have 4 yuan, and my car can’t fit it. I always want to find a use for them.
There are several boxes in the whole, which is also very spectacular. Because I helped car friends change the circuit, I made so many.
This is the second set of batteries in my car, placed behind the driver’s seat, about 480AH. Adding more than 700 AH under the passenger seat, it is about 1200 AH.
Seal the cover and make a decorative board on the outside.
This is the electrical box of the passenger seat, which contains a battery of more than 700 AH, a 3000W inverter, a solar controller, a charger, and an automatic start controller. This is a photo taken when the inverter was burned by two PTC electric heaters I plugged in, and it was repaired. It burned three times in total. The second time was when I was working on the construction site. There was no electricity. It was burned during the construction of argon arc welding. The third time was when the dog was bathed and the electric water heater was turned on, and then the hair dryer was plugged in. Burned. But the advantage is that it only burns the internal fuse, and it is very troublesome to replace it. It takes half an hour to an hour, but it will not burn anymore. I used an op amp to make an overcurrent protection. It is really practical. I will take my parents out to play during the Spring Festival this year. , my mother didn’t know, the induction cooker, pressure cooker, hood and water heater were all turned on. She thought it was like using it at home, and she decisively tripped for protection. . . Perfect!
This is an electrical box and a lithium battery for riders.
I suggest putting the electrical box under the co-driver, so as not to occupy other places. In some RVs, the electrical parts are placed in several places, which is a waste of space. I saved all the space for my luggage.
Knowing that lithium batteries are easy to use, I also replaced my dad’s electric bicycle with a lithium battery, 22AH, 48V, and it can run about 40 kilometers without any problem.
Today I found some photos, the ones with air conditioners, so let’s talk about them. I don’t use an overhead air conditioner. It has low energy efficiency, low noise, and low price. There is nothing special about it. I also didn’t disassemble the air conditioner at home and install it on the RV. It’s too troublesome, and it’s not that I don’t have the ability. The air conditioner I modified can be placed directly on the bottom of the car, with a height of 28cm, which can just fit into the space at the left rear of the bottom of the car. Only the fixed-frequency air conditioner is used, so I won’t describe it too much. The frequency conversion is only for the precise temperature control. When the temperature reaches the predetermined value, the low speed will continue to be maintained, while the fixed frequency will stop after the temperature reaches the temperature and start again after the temperature exceeds. However, the energy efficiency ratio is the same, and their power consumption is basically the same. Some people say that frequency conversion saves power, which is wrong, you can refer to the law of energy conservation. The internal machine is equipped for home use, as long as the power is matched, the other has no technical content. Don’t care what level the energy consumption label on the internal unit is, it generally represents standby energy consumption.
The horizontal compressor is 1.5P larger, about 28cm in height, 58cm in length, and more than 40cm in width. The exact dimensions are not accurate.
During the installation, a cover was also made for the external unit of the air conditioner, worrying about splashing muddy water, but it was finally found that it was unnecessary. It is still disassembled, affecting ventilation and heat dissipation.
Put it in the space at the left rear of the bottom of the car, it is just right, it will not affect the passage or the outside. . . Perfect! This was taken when the pipe was connected, evacuated, and injected with fluorine.
This is the front lift table in the car. Finally, it was replaced with this non-folding table top with a printer installed underneath, which is convenient for office work.
A small drawer is added to the lower side of the lift table near the window sill to store some sundries. Practice has proved that the more storage space on the car, the more convenient it is to use. During the Chinese New Year in Yunnan in 2018, our family of five had all kinds of clothes and food for half a month, and we couldn’t see them in the car. They were all in their proper places, and there was room for classification. This is convenient and free to take.
This was taken while drinking tea in the company yard. The folding table on the ground is a part of the front bed, which is usually a table. If you use the second bed, it is a part of the bed. It is usually placed at the back near the back door. , is a place specially reserved for it, and the interior of the car is kept clean and tidy.
Post two photos of the back bed changing to the opposite seat. It is usually a bed, and only the front deck and adjustable desk are used for office work.
My suggestion on the RV is to install a range hood. After all, many places are not suitable for cooking outside the car. Moreover, I don’t like cooking outside the car. It is unhygienic and disgusting. Of course, don’t be unhappy with the judges, it really doesn’t feel good to be surrounded by people. Furthermore, the decorative panels inside my RV are stainless steel wood-grained panels, which look like wooden panels, but are actually stainless steel panels, without upholstery, and do not absorb odors. I often cook in the car. With the help of the hood, the interior of the car is much cleaner.
When installing the smoke machine, it took a lot of effort, because the roof is arc-shaped, and the hanging cabinet will affect the installation of the smoke exhaust pipe, so it can be said that there is no place. After thinking about it, the cross-sectional area of the flat exhaust pipe is calculated according to the cross-sectional area of the exhaust pipe, and the roof is also made into a long strip according to the cross-sectional area.
The galvanized square pipe in the picture is the installation steel beam of the hanging cabinet, which is equivalent to moving the position of the exhaust pipe to the edge of the car, but the exhaust hole on the roof is inside the water retaining platform, so that the installation The position is staggered from the hole on the roof, so it cannot be seen outside the car, and the installation of the wall cabinet will not be affected inside the car. In the picture, a plate is folded out of stainless steel, and a smoke exhaust pipe joint is made on one side.
This is the air vent on the roof, the height is under the solar panel, which neither affects the use nor delays the 600W solar energy space on the roof.
The exhaust hole is inward, so that it is not easy to smell oily smoke at the side door.
This is the wall cabinet in the kitchen, and the range hood is installed in the space on the left. This wall cabinet is installed at the bottom of the stainless steel vent just now.
Stainless steel wood grain stainless steel plate, light weight, no odor, no formaldehyde, environmentally friendly and green.
[The content comes from the off-road e family community]
Author: Xinghuatai Door Industry
Link: http://bbs.ucar.run/thread_14749575_1_1.html
