LC90 rebirth - fully completed!

Instigated by Mr. Chen Mouse from Hubei, I reluctantly sold my short Y60 at a loss. I bought a new 2700 with a 3RZ head, refurbished the whole car and prepared to go to Tibet. The mouse said that the short board is not suitable for long-distance running and my Y60 It was changed to a diesel 4JB1 machine. He frightened me by saying that the plateau would be slower than the micro-face, and it happened that this LC90 was sold and the Toule started to toss!

[ This post was last edited by Cao Shangfei at 2012-6-3 09:49 ]

The whole car is disassembled and thoroughly cleaned and derusted

The engine was thoroughly cleaned and cleaned with engine cleaning agent for more than 3 hours, it looked brand new

Chassis armor, spray anti-corrosion

cabin color change

Large shelf rust removal spray paint

Decided to change the color, I still like white, firstly the interior of the cabin and the wheel eyebrows are painted first

[ This post was last edited by Cao Shangfei at 2012-6-3 07:31 ]

The bayonet of the wheel eyebrows is banned and replaced with bolts. It is inconvenient to disassemble, but it is firm.

Check the gaps and front and rear lines of the whole car fender installation

The master is meticulous in his work, but he is going to go on strike after being tortured by the bed these days, hehe

The whole car parts in the basement

The cover of the inner button of the left rear door is incomplete. You can’t buy a new one. You can DIY it by yourself. Hehe, it may not be visible after polishing and spraying paint.

Wader Positioning

Front bumper check

The door is dismantled and the door is treated to make it flawless

wader punching

The progress has been slow in the past few days, and I dare not rush. The foundation must be taken care of, and I will strive to surpass the original paint surface.

Alloy putty for the whole car, although the cost is high, there will be no cracks

The workers polish it meticulously, wait patiently by the side and dare not urge, slow work produces meticulous work!

Due to the replacement of the big foot 315-70-17 tire hub, the door is opened and the tail light is scraped, and the spare tire bracket is moved to the left to add a backing plate

DIY putty on the inner buckle cover of the left rear door

The door is sprayed in advance to prevent the overall spray paint from being in place

Refurbishment of the whole car interior to dark gray

Spray imported plastic primer

Change the middle control panel to metallic color

ready to paint

The overall paint is sprayed three times, using imported varnish

The overall effect is very good, the paint surface is very thick, and the hardness is also very good. Tomorrow, the car will be loaded and polished, and then the whole car will be soundproofed

Finish the painting, start the accessories and glass installation, then do sound insulation for the whole car, polish the paint surface, replace the big wheel hub tire 315-70-17 Cooper ATR, the hub is selected by Lao Jin in “Golden Wheel World”, it is very beautiful The progress of the project has been slow in the past few days. The first shaft of the gearbox has a tooth, and the second and third gear synchronizers are severely worn. With the help of “Xuanhua” in Guiyang, Guizhou, I replaced the dismantled gearbox. “Xuanhua” expressed his thanks!

[ This post was last edited by Cao Shangfei at 2012-12-26 11:26 ]